Renishaw MP700 Probe

Renishaw MP700 Probe

The MP700 is an optical transmission part probing system for use on machining centers. The MP700 is specifically designed to deliver high-accuracy CMM type probe performance. The MP700 uses strain gage sensors and and an internal microprocessor to provide a solid state sensor mechanism with unprecedented life and reliability. Low trigger force and consistent pre-travel results in high accuracy with long styli.

The MP700 is available with either 35° or 70° output. An M code must be supplied to turn the probe on. An internal timer or M code is used to turn the probe off.

  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±16.5°
  • Z: 11 mm (0.45 in)
  • Stylus trigger force
  • X and Y: 19 gf
  • Z: 325 gf
  • Unidirectional repeatability 0.25 μm (0.00001 in)

Helpful information

MP700 Retrofit Kit
Includes:

  • MP700 probe with 70° OMP
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm carbon fiber styli
  • Sealtite conduit
  • 9 V alkaline battery
  • TK1 tool kit
  • Renishaw Inspection Plus software
  • Installation and applications support

A shank is not included in this kit.
Part number: MP700-NS-S

MP700 Hardware Only Kit
Includes:

  • MP700 probe with 70° OMP
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm carbon fiber styli
  • Sealtite conduit
  • 9 V alkaline battery
  • TK1 tool kit

A shank is not included in this kit.
Part number: MP700-NS-KIT

MP700 Probe
Includes:

  • MP700 probe
  • Adjusting plate
  • 9 V alkaline battery
  • Tool kit
  • Part number: A-2107-0035 (35°)
  • Part number: A-2107-0070 (70°)

MP700 Probe Module
Part number: A-2108-0001

MP700 OMP only
Part number: A-2107-0036 (35°)
Part number: A-2107-0071 (70°)

OMM Optical Receiver
Part number: A-2033-0576

OMM Mounting Bracket
Part number: A-2033-0830

MI12 Interface
Part number: A-2075-0142

Sealtite Conduit
¼ in conduit, 5 ft long. Includes one fitting.
Part number: SEALTITE, 7455