Renishaw LP2 Inspection Probe Accessories

FS1 adjustable female socket
Provides ±4° of angular rotation about the centerline of the LP2. Supplied with 500 mm long cable, protective cover and adjusting screws.
Part number: A-2063-6697

FS2 fixed female socket
Designed for rigid mounting of an LP2. Supplied with 500 mm long cable and protective cover.
Part number: A-2063-5431

FS3 single axis adjustable holder
The socket pivots on two balls, this provides ±4° of pitch adjustment about the centerline of the LP2. Supplied with 500 mm long cable, protective cover and adjusting screws.
Part number: A-2063-5308

MA4 90° adaptor
Part number: A-2063-7600

COS to LP2 adaptor
This adaptor allows the use of the LP2 on the MP7/MP8/MP9/MP10 OMP.
Part number: A-2063-7774

IMP inductive module
Part number: A-2028-7574

IMM inductive module

Part number: A-2028-_ _ _ _

MI5 interface
Part number: A-2019-0006

MI8 interface
Part number: A-2037-0010

LPE1 extension
A 50 mm long extension which can be fitted between the LP2 and holder.
Part number: A-2063-7001

LPE2 extension
100 mm long.
Part number: A-2063-7002

LPE3 extension
150 mm long
Part number: A-2063-7003

LP2 straight shanks
LP2 straight shanks are fitted with FS2 socket assemblies to accommodate the LP2 probe. An MI8 interface is also required.

LP2 0.75 in straight shank with FS2 and cable assembly
Part number: A-2063-8326

LP2 1 in straight shank with FS2 and cable assembly
Part number: A-2063-8328

LP2 22 mm straight shank with FS2 and cable assembly
Part number: A-2063-8366