Renishaw LP2, LTO3T, LTO2T, LTO2S Inspection Probes For Turning Centers

Renishaw LP2, LTO3T, LTO2T, LTO2S Inspection Probes For Turning Centers

Various styles of optical transmission system are available for use on turning centers. Each system is functionally similar. All may be turned on and off via an M code, or turned on via an M code and turned off via an internal timer settable to 33 or 134 seconds.

All lathe transmission systems require an LP2 or LP2H probe. The primary differences between the
lathe transmission systems are shown below:

OMP Type/ Size/ Turret Mounting Methods/ Battery Access/ Battery Required

  • LTO3T/ 62 mm dia. × 49 mm, shank length 80 mm/ Integral straight shank, Available in metric or inch
    A-2030-0330 (25 mm), A-2030-0334 (1 inch)/ Thru rear of turret-resident, straight shank/ 2 × Duracell DL123
  • LTO2T/ 62 mm dia. × 49 mm, shank length 60 mm, Integral straight shank, Available in metric or inch
    A-2030-0218 (25 mm), A-2030-0274 (1 inch)/ Thru rear of turret-resident, straight shank/ 1 × Duracell DL123
  • LTO2S/ 62 mm dia. × 87 mm, shank length depends on shank selected, Via user-selected shank, eg
    straight (metric or inch) or taper (CAT, BT etc.)/ Thru battery housing located external to turret face/ 1 × Duracell 9 V PP3

 

LP2/LTO3T/S retrofit kit

Includes:

  • LP2 probe
  • LTO3T OMP
  • Ø25 mm integral shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Lathe software
  • Sealtite kit
  • Installation & application support

Part #: LP2-LTO3T-S
LP2/LTO3T hardware only kit
Includes:

  • LP2 probe
  • LTO3T OMP
  • Ø25 mm integral shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Sealtite kit

Part #: LP2-LTO3T-KIT

LP2/LTO2T/S retrofit kit
Includes:

  • LP2 probe
  • LTO2T OMP
  • Ø25 mm integral shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Lathe software
  • Sealtite kit
  • Installation & application support

Part #: LP2-LTO2T-S

LP2/LTO2T hardware only kit
Includes:

  • LP2 probe
  • LTO2T OMP
  • Ø25 mm integral shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Sealtite kit

Part #: LP2-LTO2T-KIT

LP2/LTO2S/S retrofit kit
Includes:

  • LP2 probe
  • LTO2S OMP
  • Ø25 mm straight shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Lathe software
  • Sealtite kit
  • Installation & application support

Part #: LP2-LTO2S-S

LP2/LTO2S hardware only kit
Includes:

  • LP2 probe
  • LTO2S OMP
  • Ø25 mm straight shank
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 30 mm styli (2)
  • Sealtite kit

Part #: LP2-LTO2S-KIT

LTO3T OMP with 25 mm integral shank
Part number: A-2030-0330

LTO3T OMP with 1 in integral shank
Part number: A-2030-0334

LTO2T OMP with 25 mm integral shank
Part number: A-2030-0218

LTO2T OMP with 1 in integral shank
Part number: A-2030-0274

LTO2S OMP
Part number: A-2030-0183

OMM optical receiver
Part number: A-2033-0576

OMM mounting bracket
Part number: A-2033-0830

MI12 interface
Part number: A-2075-0142

Sealtite conduit
¼ in conduit, 5 ft long. Includes one fitting.
Part number: SEALTITE, 7455

9 V alkaline battery
Used with LTO2S OMP.
Part number: P-BT03-0001

3 V DL123A battery
Used with LTO2T and LTO3T.
Part number: P-BT03-0006

LTO2 battery upgrade kit
Required for LTO2T and LTO2 systems currently using 10.8 V mercury battery.
Includes:

  • Battery cap
  • Battery boosting module
  • 3 V DL123 A battery

Part number: A-2030-0560

LTO2S accessories kit
Includes:

  • Tool kit
  • Steel adjusting plate
  • Ø8 mm ball
  • 9 V alkaline battery
  • M4 × 12 screw (4) P-SC31-0412
  • M5 × 12 screw (4) P-SC31-0512
  • M8 × 12 screw (2) P-SC04-0812
  • M5 × 16 grub screw (4) P-SC11-0516
  • Washer (4)
  • O ring

Part number: A-2030-0244